1 2

Filacorp

rPETG EcoBlend

rPETG EcoBlend

€14,99 EUR
€14,99 EUR
Sale Sold Out
Tax included.

€0.86 Spool Deposit Included — refunded on return

Size
Diameter
View full details

100% Zero Waste ♻️

EcoBlend filament is crafted from the transitional runs between colour changes, making it available only in limited quantities at a time. By repurposing materials that might otherwise go to waste, we ensure zero-waste production while offering a filament that adds a unique touch to every print.

DISCLAIMER: EcoBlend filament is made from transitional materials, so colour may vary from spool to spool. Product images are for reference only and may not reflect the exact colour received. These variations are a natural result of the process and do not affect filament quality or performance.

About EcoBlend rPETG

EcoBlend rPETG has a manufacturing tolerance of ±0.05mm and is made out of transitional colours from our rPETG Titan filament, creating a one of a kind spool.

Our EcoBlend rPETG has mechanical properties which are similar to regular PETG, with the only difference being it's unique colour and it's 100% Zero Waste composition, ensuring both performance and sustainability.

Pre-drying is Highly Recommended for Optimal Print Quality.

Filacorp rPETG Titan should be dried before use and kept moisture-free during printing.

Drying Conditions:

  • 65°C for 8 hours in Filament Dryer
  • 75-85°C for 12 hours in an Enclosed Printer

Recommended Print Settings

  • Nozzle Temperature

    250 (± 10 °C)

  • Print Bed Temperature

    85 (± 5 °C)

  • Fan Speed

    65%

1 3

Key Attributes

  • Pros

    Rapid Printing

    Heat Resistance

    Strength & Durability

    100% Zero Waste ♻️

    Environmentally Friendly

    Chemical & Weather Resistance

  • Cons

    Slow Cooling

    Higher Printer Temperature

    Absorbs Moisture (Hygroscopic)

General FAQs

What is EcoBlend?

EcoBlend is our sustainable solution for utilising transitional colours in 3D printing. These colours, which may vary from from one spool to another, are repurposed into unique filament spools, adding diversity to prints while reducing waste. By opting for EcoBlend, users contribute to environmental sustainability while enjoying vibrant and individualised prints.

Best Printer Settings?

Nozzle Temperature: 200˚C - 240˚C
Heated Bed Temperature: 45˚C - 60˚C (Can be used on a cold bed too)
Printing Speed: 30mm/s - 70mm/s (Can be used at higher speeds)
Fan: On

EcoBlend rPLA has a similar printing finish to our rPLA Prime, with the added feature of having it's unique colour and being 100% Zero Waste.

Should I Clean my Plate?

Yes, you should clean your build plate after every 5 - 10 prints. Even if your prints are adhering well to the bed, it is best to clean the plate to prevent buildup of small debris with can then interfere with adhesion.

You can clean your plate with warm water and some soap, or alternatively, use 90% isopropyl alcohol (IPA) if available.

Should I dry my Filament?

While drying your filament before use is helpful, it's not necessary, especially if there are no signs of moisture during printing.

However, if you do encounter moisture-related issues while printing, we suggest considering drying the filament to ensure optimal performance.

This flexible approach allows you to achieve high-quality printing results while maintaining convenience.

Just a reminder: be cautious not to overheat your filament during drying, as this could cause problems. The ideal drying settings are 55°C for 6 hours.

What Should my Bed Temperature be?

The print bed temperature may vary from printer to printer.

For Non-Enclosed Printers, we usually recommend the following settings:

-Textured PEI Plate: 60 - 65 °C

- Smooth PEI Plate: 55 - 60 °C

- Glass Plate: 50 - 55 °C

- Cool Plate: 0 - 35 °C

For Enclosed Printers, we usually recommend the following settings:

-Textured PEI Plate: 55 - 60 °C

- Smooth PEI Plate: 50 - 55 °C

- Glass Plate: 50 - 55 °C

- Cool Plate: 0 - 35 °C

What Should I Do With My Empty Spool?

We accept back empty spools from our customers anytime of the week. Should you wish to provide us back with one of our empty spools (with the sticker in good condition) we would provide you with a €0.86 discount per spool on your next order

You may also like

1 4
View all